cg14config(1M)
NAME
cg14config - configure the cgfourteen device
SYNOPSIS
/usr/platform/ platform-name /sbin/cg14config [-d device]
[-r resolution] [-g gammavalue] [-G gammafile] [-
u degammavalue] [-U degammafile]
DESCRIPTION
cg14config sets up state on the selected cgfourteen device.
platform-name can be found using the -i option of uname(1).
cg14config is supported only on Desktop SPARCsystems with SX
graphics option.
The interface, output, and command location are uncommitted
and subject to change in future releases.
OPTIONS
-d device
Use device as the cgfourteen device to configure.
Default is /dev/fb.
-r resolution
Use resolution as the desired screen resolution. Reso-
lution is specified in terms of screen width and
height (in pixels), and vertical refresh (in hz).
Available resolutions are:
1024x768@60
1024x768@66
1024x768@70
1152x900@66
1152x900@76
1280x1024@66
1280x1024@76
1600x1280@66
1920x1080@72
The default is the value read from the monitor sense codes.
Note that some or all of the resolutions above may not be
supported by any given monitor. If a programmed resolution
is outside of the range of allowable values for a monitor,
unpredictable results can occur, including damage to the
monitor. Thus, care should be taken when programming the
resolution. See Openboot Command Reference for a descrip-
tion of how to reset the console device to the default value
if it becomes unusable from programming an unsupported reso-
lution.
The -r option is not available when the window system
is running.
-g gammavalue
Each entry of the gamma lookup table will be loaded
with entry^(1/gammavalue). The gamma lookup table has
256 entries. Default gammavalue is 2.2.
-G filename
Initialize the gamma lookup table with the contents of
filename. The format of
filename is 256 triplets (red green blue) of non-
negative integers separated by NEWLINE characters. The
integers must be in the range 0 to 1023, inclusive.
-u degammavalue
Each entry of the degamma lookup table will be loaded
with entry^(degammavalue). The degamma lookup table
has 256 entries. Default degammavalue is 2.2.
-U filename
Initialize the degamma lookup table with the contents
of filename. The format of filename is 256 entries
of non-negative integers separated by NEWLINE charac-
ters. The integers must be in the range 0 to 255,
inclusive.
EXIT STATUS
cg14config returns 0 on success and a positive integer on
failure.
1 Selected device is not a cgfourteen device.
2 Requested action failed.
3 Unsupported resolution.
4 Gamma or degamma value out of range.
FILES
/platform/platform-name/kernel/drv/cgfourteen
cgfourteen device driver
ATTRIBUTES
See attributes(5) for descriptions of the following attri-
butes:
____________________________________________________________
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
|_____________________________|_____________________________|
| Availability | SUNWkvm |
|_____________________________|_____________________________|
SEE ALSO
uname(1), init(1M), mmap(2), attributes(5)
Platform Notes: SPARCstation 10SX System Configuration Guide
Openboot Command Reference
Man(1) output converted with
man2html