chs(7D)
NAME
chs - IBM ServeRAID PCI host adapter driver
DESCRIPTION
The chs driver is the IBM ServeRAID PCI controller driver.
PRECONFIGURATION
Known Problems and Limitations
To prevent data loss, a SCSI disk drive that is not defined
as part of any physical pack within a logical drive will not
be accessible through the Solaris operating environment.
CONFIGURATION
Auto-configuration code determines whether the adapter is
present at the configured address and what types of devices
are attached to it. The IBM ServeRAID is primarily used as a
disk array (system drive) controller.
To configure the attached disk arrays, you must configure
the controller (using the configuration utilities provided
by the hardware manufacturer) before booting the Solaris
operating environment You use the configuration utilities to
set RAID levels, stripe parameters, cache mechanisms and
perform other functions. For more information, see the user
manual supplied with your hardware.
FILES
/kernel/drv/chs.conf
chs configuration file
/dev/dsk/cn dn[s|p] n
block device
/dev/rdsk/cn dn[s|p] n
raw device where:
cn controller n
dn LUN n (0-7)
sn UNIX system slice n (0-15)
pn fdisk(1M) partition (0)
ATTRIBUTES
See attributes(5) for a description of the following attri-
butes:
____________________________________________________________
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
| Architecture | x86 |
|_____________________________|_____________________________|
SEE ALSO
fdisk(1M), attributes(5), cmdk(7D)
Man(1) output converted with
man2html