cv_init(9F)
NAME
condvar, cv_init, cv_destroy, cv_wait, cv_signal,
cv_broadcast, cv_wait_sig, cv_timedwait, cv_timedwait_sig -
condition variable routines
SYNOPSIS
#include <sys/ksynch.h>
void cv_init(kcondvar_t *cvp, char *name, kcv_type_t type,
void *arg);
void cv_destroy(kcondvar_t *cvp);
void cv_wait(kcondvar_t *cvp, kmutex_t *mp);
void cv_signal(kcondvar_t *cvp);
void cv_broadcast(kcondvar_t *cvp);
int cv_wait_sig(kcondvar_t *cvp, kmutex_t *mp);
clock_t cv_timedwait(kcondvar_t *cvp, kmutex_t *mp, clock_t
timeout);
clock_t cv_timedwait_sig(kcondvar_t *cvp, kmutex_t *mp,
clock_t timeout);
INTERFACE LEVEL
Solaris DDI specific (Solaris DDI).
PARAMETERS
cvp A pointer to an abstract data type kcondvar_t.
mp A pointer to a mutual exclusion lock (kmutex_t), ini-
tialized by mutex_init(9F) and held by the caller.
name Descriptive string. This is obsolete and should be
NULL. (Non-NULL strings are legal, but they're a waste
of kernel memory.)
type The constant CV_DRIVER.
arg A type-specific argument, drivers should pass arg as
NULL.
timeout
A time, in absolute ticks since boot, when
cv_timedwait() or cv_timedwait_sig() should return.
DESCRIPTION
Condition variables are a standard form of thread synchroni-
zation. They are designed to be used with mutual exclusion
locks (mutexes). The associated mutex is used to ensure that
a condition can be checked atomically and that the thread
can block on the associated condition variable without miss-
ing either a change to the condition or a signal that the
condition has changed. Condition variables must be initial-
ized by calling cv_init(), and must be deallocated by cal-
ling cv_destroy().
The usual use of condition variables is to check a condition
(for example, device state, data structure reference count,
etc.) while holding a mutex which keeps other threads from
changing the condition. If the condition is such that the
thread should block, cv_wait() is called with a related con-
dition variable and the mutex. At some later point in time,
another thread would acquire the mutex, set the condition
such that the previous thread can be unblocked, unblock the
previous thread with cv_signal() or cv_broadcast(), and then
release the mutex.
cv_wait() suspends the calling thread and exits the mutex
atomically so that another thread which holds the mutex can-
not signal on the condition variable until the blocking
thread is blocked. Before returning, the mutex is reac-
quired.
cv_signal() signals the condition and wakes one blocked
thread. All blocked threads can be unblocked by calling
cv_broadcast(). You must acquire the mutex passed into
cv_wait() before calling cv_signal() or cv_broadcast().
The function cv_wait_sig() is similar to cv_wait() but
returns 0 if a signal (for example, by kill(2)) is sent to
the thread. In any case, the mutex is reacquired before
returning.
The function cv_timedwait() is similar to cv_wait(), except
that it returns -1 without the condition being signaled
after the timeout time has been reached.
The function cv_timedwait_sig() is similar to cv_timedwait()
and cv_wait_sig(), except that it returns -1 without the
condition being signaled after the timeout time has been
reached, or 0 if a signal (for example, by kill(2)) is sent
to the thread.
For both cv_timedwait() and cv_timedwait_sig(), time is in
absolute clock ticks since the last system reboot. The
current time may be found by calling ddi_get_lbolt(9F).
RETURN VALUES
0 For cv_wait_sig() and cv_timedwait_sig() indicates
that the condition was not necessarily signaled and
the function returned because a signal (as in kill(2))
was pending.
-1 For cv_timedwait() and cv_timedwait_sig() indicates
that the condition was not necessarily signaled and
the function returned because the timeout time was
reached.
>0 For cv_wait_sig(), cv_timedwait() or
cv_timedwait_sig() indicates that the condition was
met and the function returned due to a call to
cv_signal() or cv_broadcast(), or due to a premature
wakeup (see NOTES).
CONTEXT
These functions can be called from user, kernel or interrupt
context. In most cases, however, cv_wait(), cv_timedwait(),
cv_wait_sig(), and cv_timedwait_sig() should not be called
from interrupt context, and cannot be called from a high-
level interrupt context.
If cv_wait(), cv_timedwait(), cv_wait_sig(), or
cv_timedwait_sig() are used from interrupt context, lower-
priority interrupts will not be serviced during the wait.
This means that if the thread that will eventually perform
the wakeup becomes blocked on anything that requires the
lower-priority interrupt, the system will hang.
For example, the thread that will perform the wakeup may
need to first allocate memory. This memory allocation may
require waiting for paging I/O to complete, which may
require a lower-priority disk or network interrupt to be
serviced. In general, situations like this are hard to
predict, so it is advisable to avoid waiting on condition
variables or semaphores in an interrupt context.
EXAMPLES
Example 1: Waiting for a Flag Value in a Driver's Unit
Here the condition being waited for is a flag value in a
driver's unit structure. The condition variable is also in
the unit structure, and the flag word is protected by a
mutex in the unit structure.
mutex_enter(&un->un_lock);
while (un->un_flag & UNIT_BUSY)
cv_wait(&un->un_cv, &un->un_lock);
un->un_flag |= UNIT_BUSY;
mutex_exit(&un->un_lock);
Example 2: Unblocking Threads Blocked by the Code in Example
1
At some later point in time, another thread would execute
the following to unblock any threads blocked by the above
code.
mutex_enter(&un->un_lock);
un->un_flag &= ~UNIT_BUSY;
cv_broadcast(&un->un_cv);
mutex_exit(&un->un_lock);
NOTES
It is possible for cv_wait(), cv_wait_sig(), cv_timedwait(),
and cv_timedwait_sig() to return prematurely, that is, not
due to a call to cv_signal() or cv_broadcast(). This occurs
most commonly in the case of cv_wait_sig() and
cv_timedwait_sig() when the thread is stopped and restarted
by job control signals or by a debugger, but can happen in
other cases as well, even for cv_wait(). Code that calls
these functions must always recheck the reason for blocking
and call again if the reason for blocking is still true.
If your driver needs to wait on behalf of processes that
have real-time constraints, use cv_timedwait() rather than
delay(9F). The delay() function calls timeout(9F), which can
be subject to priority inversions.
SEE ALSO
kill(2), ddi_get_lbolt(9F), mutex(9F), mutex_init(9F)
Writing Device Drivers
Man(1) output converted with
man2html